Free Home Safety Inspection In Queens NY
You never know when something is going to go wrong with your home’s electrical system. With that being said, it is wise to contact us to take advantage of our free home safety inspections. Our qualified electrician will visit your home and carefully inspector your home’s electrical system. They will identify anything that could create problems in the future. Then, we’ll work with you closely to reduce the risks involved.
This may require us to replace old wires or install new GFI outlets. Either way, we want you to know that several things can create problems for your home.
- Older Wiring – If your home is more than 50 years old, there is a risk that it contains cloth-insulated wires. This is very dangerous since the cloth may degrade and leave the wire exposed. It is pertinent to replace older, cloth-insulated wires before problems occur.
- Low-Quality Aluminum Wiring – Many years ago, electricians used inexpensive aluminum when wiring homes. The only problem is that this wire is low-quality and prone to faults. This could lead to a fire in your home so it is best to replace aluminum wiring.
- Circuit Breaker Trips – Your circuit breaker might trip once or twice every few months. This normally isn’t a problem. However, it is concerning if your breakers trip very quickly. If this happens, you need to find out what is going on so you can fix the problem quickly.
- Too Much On One Outlet – It is important to avoid overloading your electrical outlets. This will create problems and put your loved ones at risk.
Our qualified electricians can complete electrical home safety inspections in a few hours. We’ll do what we can to identify problematic setups so we can fix these things as quickly as possible. In addition to this, we’re confident that our advice will save you money in the future.
Frequent Asked Questions – Free Home Safety Inspections
This is a routine test that determines whether or not your electrical system is safe. The test will check your system and make sure it is not being overloaded. It will also help identify potential hazards and defects so these problems can be remedied quickly.
There are several types of electrical tests. We use each test to make sure that your electrical system is working as intended and safe.
The EICR or Electrical Installation Condition Report is a document you’ll receive after the electrical system has been installed. The information found in the report can be very helpful when troubleshooting electrical problems.
You’ll want to think about using a safety inspection checklist to ensure that your electrical system is safe. A checklist can help you make sure that your system is not overloaded. If you believe something is wrong, you should contact us before it is too late. We’ll do everything we can to identify and fix the problem so you can sleep soundly.