Electrical Renovations And Remodels In Queens
Most homeowners don’t realize it, but an electrical renovation can entail much more than your average structural changes. You not only have to consider the home’s electrical system, you also have to consider plumbing, appliances, and interior design. All of these components are crucial and can affect your renovation in a multitude of ways. If you want to get the job done right the first time around in the most effective way possible, give our local Queen’s branch a call.
Electrical renovation oftentimes involves work on older electrical systems. While this might seem like a modern upgrade, there is much more to the job. This is especially true for homes that were built prior to 1950.
Homes Built Prior To 1950
Any home that was built before 1950 likely has outdated wiring. Wiring that likely poses fire hazards. This is because it was common for professional electricians to utilize cloth-insulated wiring. Unfortunately, this cloth deteriorates over time and falls away, leaving wires bald and exposed. Such wiring systems obviously need renovating.
Homes Built During The 60s And 70s
While cloth wiring was outdated by the 60s and 70, it soon became a practice of utilizing aluminum wiring. Unfortunately, this proved to be a problem over time as well. This is also a serious fire hazard and could lead to potential shorts.
Increased Electrical Demands
Outdated wiring is not the only issue that comes along with most renovations. Sometimes when dealing with renovations, electrical professionals also have to consider increased electrical demands. As technology increase, more and more people begin to rely on electrical devices. Devices that are more sensitive to surges, but require more electrical load.
Adding Loads To The System
When loads are added to circuits, electricians have to evaluate throes loads. Not doing so could result in overloading of the entire circuit, which would cause major issues.
Whatever the situation, you have to make sure that you are dealing with qualified and competent electricians when renovating. Electricians must be able to properly calculate electrical loads as well as the size and type of wire needed to handle that load. This is something we’ve been helping local Queens customers with for years and will continue to do so as long as we possibly can.
Common Asked Questions Regarding Remodels And Renovations
When renovating your home, it’s the perfect time to evaluate your electrical system. Not just specific components and devices either, but the entire system. Upgrading your system at the same time as the renovation not only makes the job easier, but it’ll likely save you thousands of dollars in the process. You might be able to prevent problems that could also lead to major future issues.
If you are adding more circuits and more loads, you likely won’t have any choice but to update your wiring. Not doing so would not only be highly unsafe, but it could result in major electrical problems and issues. The more energy consumption, the greater the strain on your electrical system.
Each job is entirely different, but a qualified electrician can help you determine the best place to start. We can help you by reviewing and evaluating your current wiring as well as your home’s current wiring needs. Older homes will obviously require more upgrades, but as was mentioned, now is the best time to go ahead and handle the issue. Our highly trained inspectors and assessors can evaluate everything and walk you through the entire process. Whatever the situation, we’ll hold your hand through the entire job, offering device when and where needed.
Testimonials
We Accept:
